| Ortofon OMEK Elektro Kit Many years of experience from producing disco cartridges, and a close contact to DJ's, have resulted in several lines suitable for all tonearms and all amplifiers. The Ortofon disco cartridges are available in ½ inch versions for mounting in standard headshells or in the elegant integrated Ortofon Concorde design - for direct mounting in tonearms with standard sockets. For easier cueing, the nose of all the Ortofon disco cartridges has an extra large cut-out which makes the stylus freely visible from above, and further, the tip of the cantilever is fluorescent. Specifications: Output voltage at 1000 Hz, 5cm/sec. 7,5 mV Channel balance at 1 kHz 1,5 dB Channel separation at 1 kHz 25 dB Channel separation at 15 kHz 15 dB Frequency range at - 3dB 20-22.000 Hz Frequency response 20-15.000 Hz +3 / -2 dB FIM distortion at recommended tracking force, DIN 45.542 < 1% Tracking ability at 315Hz at recommended tracking force 80 µm Compliance, dynamic, lateral 6 µm/mN Stylus type Spherical Stylus tip radius R 18 µm Equivalent stylus tip mass 0,6 mg Tracking force range 3,0-5,0 g (30-50 mN) Tracking force, recommended 4,0 g (40 mN) Tracking angle 20° Internal impedance, DC resistance 750 Ohm Internal inductance 450 mH Recommended load resistance 47 kOhm Recommended load capacitance 200-600 pF Cartridge colour, body/stylus White/White Cartridge weight 5 g Replacement stylus unit Elektro |
